Skip to content

1. Prepare your devices

Make sure your device is ready to communicate with Scout.


1. Check device compatibility

Scout is compatible with a wide range of Circutor devices. Make sure your device is in the list below and select it to see the connection instructions with Scout.

Network Analyzers

  • QNA-600
  • QNA-D500
  • CVM-D50
  • CVM-B50

Multi-channel Network Analyzers

  • CVM-D400

Reactive Power Regulators

  • Computer C Wi-Fi
  • SmartLink VAR + Computer SMART III

Input and Output Modules

  • LM-D44
  • LM-A42-D11

Line EDS cloud

Advanced Low Voltage Monitoring Substations

Can't find your device?

You can use Line EDS cloud to connect any Circutor device with Modbus RTU and Modbus TCP/IP communications.


2. Connect your device to the network

Your device needs an Internet connection to communicate with Scout. Depending on the device, you can configure its network connection from the device's web server or with the MyConfig app.

Access the web server by connecting to the device via Ethernet or Wi-Fi and opening its IP address in a browser. See the device manual for more details.

→ Download the MyConfig app: Google Play · App Store

Configure the network connection from the web server or MyConfig and check that the device has Internet access.

If you need help configuring the connection, see the network configuration section of the device manual.


3. Check the firmware

For the best experience, make sure your device has the latest firmware version installed before connecting it to Scout. You can check and update the firmware from the device's web server.

→ Download the latest firmware versions